PI into Vitesse

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #43741
    rickjhayward
    Member
    #43742
    rickjhayward
    Member

    I’ve just bought a Pi and plan to put the engine in my Vitesse, I’ll use the Vitesse sump, front and rear engine plates, flywheel and clutch(the Pi is auto)and front pulley. I,m figuring on mounting the Pi tank between the rear wheel wells with the pump in the boot. Am I missing anything?
    Richard

    #43743
    britishcarfreak
    Keymaster

    Sounds like you’ve got it all. You’ll need a return fuel line from the metering unit to the tank. A good opportunity to put in a custom swirl tank assembly and perhaps double pump bosch pull / small facet type push. One would push fuel from tank to swirl tank to keep fuel at the bosch (which is a sucking pump). totally worth doing at this formative stage in my opinion.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

CONTACT US

We're not around right now. But you can send us an email and we'll get back to you, asap.

Sending

Log in with your credentials

or    

Forgot your details?

Create Account